Radom VIS P.35 “ersatz” grips

This variation was used on the late WWII Radoms, and they will fit the late war pistols without grip bushings. They can also be used on early Radoms if you remove the bushings and use the “fat” style screws.

Note: The screw holes are made to leave the screws about 1/2 mm shy of the inside of the frame when snug, but it’s still a good idea to install the grips with the magazine removed and check the mag well for clearance before inserting the magazine again. The late war grip/screw combo is not an ideal design, and the screws can hit the magazine if they’re tightened too much.